Vape Maintenance Guide - How to Clean & Fix Common Issues

Keep Your Vape Device Running Perfectly

Proper maintenance extends your device's lifespan and ensures the best vaping experience. This guide covers essential care tips and solutions to common problems.

Vape Device Maintenance Checklist

Follow this comprehensive checklist to keep your vape performing at its best. Regular maintenance prevents problems, extends device life, and ensures optimal flavour and vapour production.

Daily Maintenance (2-3 minutes)

• ☐ Check e-liquid level and refill before tank runs dry
• ☐ Wipe down exterior with a clean, dry cloth
• ☐ Clean mouthpiece/drip tip with tissue or cloth
• ☐ Check for any visible leaks around tank or pod
• ☐ Ensure device is charging properly (if battery is low)
• ☐ Inspect airflow vents for blockages or debris

Weekly Maintenance (10-15 minutes)

• ☐ Deep clean the mouthpiece with warm water and dry thoroughly
• ☐ Inspect tank or pod for cracks, damage, or wear
• ☐ Check all O-rings and seals for damage or displacement
• ☐ Clean battery connection points with cotton swab
• ☐ Wipe down charging port (ensure it's dry)
• ☐ Check for e-liquid buildup in airflow channels
• ☐ Test fire button responsiveness
• ☐ Verify device settings haven't changed unexpectedly

Bi-Weekly Maintenance (15-20 minutes)

• ☐ Replace coil (or when you notice burnt taste/reduced flavour)
• ☐ Fully disassemble and clean tank/pod system
• ☐ Rinse tank components with warm water (avoid coil and electronics)
• ☐ Dry all components completely before reassembly
• ☐ Check coil compatibility and stock up on replacements
• ☐ Inspect battery for any swelling, damage, or performance issues
• ☐ Clean threading on tank and mod connection

Monthly Maintenance (20-30 minutes)

• ☐ Deep clean entire device (full disassembly where safe)
• ☐ Replace all O-rings if showing wear or hardening
• ☐ Check firmware updates (for devices with upgradeable firmware)
• ☐ Test battery life and charging time (note any degradation)
• ☐ Inspect USB charging cable for fraying or damage
• ☐ Review and rotate e-liquid stock (check expiry dates)
• ☐ Clean carrying case or storage area
• ☐ Assess overall device performance and plan for replacement if needed

Quarterly Maintenance (30+ minutes)

• ☐ Evaluate device performance vs. when new
• ☐ Consider replacing external batteries (if removable and showing degradation)
• ☐ Deep clean all accessories (spare tanks, drip tips, cases)
• ☐ Review and update emergency backup device/supplies
• ☐ Stock check: coils, e-liquids, spare parts, cleaning supplies
• ☐ Research new products or upgrades if current device is aging

Coil Replacement Indicators

Replace your coil immediately if you notice:

• Burnt or unpleasant taste
• Significantly reduced flavour quality
• Decreased vapour production
• Gurgling or flooding issues
• Coil has been in use for 1-2 weeks (varies by usage)
• Visible dark buildup or discolouration on coil

How to Properly Prime a New Coil

1. Apply 3-5 drops of e-liquid directly onto the exposed cotton/wicking material
2. Install coil into tank and fill with e-liquid
3. Let sit for 5-10 minutes to fully saturate
4. Start vaping at lower wattage and gradually increase
5. Take a few primer puffs without firing the device

Deep Cleaning Your Tank (Step-by-Step)

1. Empty remaining e-liquid from tank
2. Fully disassemble tank (remove coil, glass, O-rings, drip tip)
3. Rinse all components except coil under warm water
4. Use a soft brush for stubborn residue (old toothbrush works well)
5. Dry all parts thoroughly with clean cloth or paper towel
6. Allow to air dry for 30+ minutes to ensure no moisture remains
7. Reassemble with new or cleaned coil
8. Prime coil and refill tank

Common Problems and Solutions

Burnt Taste: Replace the coil, ensure the coil is properly primed, or reduce wattage.

Leaking: Check O-rings for damage, ensure tank is properly assembled, and don't overfill.

Weak Flavour: Replace old coils, clean the tank, or try a fresh e-liquid.

Device Won't Fire: Charge the battery, clean the connection points, or check the coil is properly installed.

Spitting or Popping: Reduce power, ensure coil isn't flooded, or try a different e-liquid ratio.

Battery Safety Checklist

• ☐ Use only the manufacturer's recommended charger
• ☐ Never leave devices charging unattended overnight
• ☐ Don't charge on flammable surfaces (beds, sofas)
• ☐ Replace batteries showing signs of damage, swelling, or overheating
• ☐ Store spare batteries in protective cases
• ☐ Keep batteries away from metal objects (keys, coins)
• ☐ Don't expose batteries to extreme temperatures
• ☐ Recycle old batteries properly at designated facilities

Storage Best Practices

• Store devices upright to prevent leaking
• Keep in cool, dry place away from direct sunlight
• Empty tank if storing device for extended periods
• Store e-liquids in original childproof containers
• Keep all vaping products away from children and pets
• Don't leave devices in hot cars or freezing conditions

When to Replace Your Device

Consider replacing your vape device if:

• Battery no longer holds charge adequately
• Physical damage affects functionality or safety
• Consistent performance issues despite proper maintenance
• Device is 12-18+ months old and showing wear
• Replacement parts are no longer available
• You're ready to upgrade to newer technology

Need replacement parts or a new device? Shop our replacement coils, accessories, and latest vape kits.

Printable Maintenance Schedule

Pro Tip: Set phone reminders for weekly and monthly maintenance tasks to stay on track. Consistent care means better performance, longer device life, and a superior vaping experience.

Questions about maintaining your specific device? Contact our support team for personalised guidance.