OXVA | LONDON VAPE STORE

OXVA XLIM PRO SERIES

OXVA XLIM Pro 4 Refillable Pod Vape Kit

The OXVA XLIM Pro 4 combines an 1800mAh rechargeable battery, adjustable 5–30W output and a 0.98-inch HD colour screen in a refillable pod system. Choose from ten finishes at London Vape Store and tailor the draw with adjustable airflow. Anti-Burn Technology adds low-liquid monitoring when enabled with a compatible XLIM ABT pod.

PRODUCT HIGHLIGHTS

1800mAh Battery • 5–30W Adjustable Output • Anti-Burn Technology with Compatible ABT Pods • 0.98-inch HD Colour Screen • 2ml Refillable Pods • 5V/3A USB-C Charging • 10 Finishes

OXVA XLIM Pro 4 – Product Overview

The OXVA XLIM Pro 4 Pod Vape Kit is a rechargeable, refillable system for mouth-to-lung (MTL) and restricted direct-to-lung (RDL) vaping. Fill a suitable pod with your chosen compatible e-liquid, let its wick saturate, then adjust the airflow and power within that pod's recommended range.

The built-in 1800mAh battery supports adjustable 5–30W output and automatic power matching. USB Type-C charging has a manufacturer-rated input of 5V/3A; charging performance and battery life depend on equipment, settings and use.

Anti-Burn Technology (ABT) monitors e-liquid levels when a compatible XLIM ABT cartridge is fitted and the function is enabled. It can show a refill reminder and interrupt output when liquid is too low, helping reduce dry-coil operation without replacing normal pod care.

A 0.98-inch HD colour display shows device information. Four screen themes, three vaping animations and RGB lighting let you personalise the interface.

The listed UK kit includes two 2ml XLIM ABT UNITECH 3.0 pods with built-in mesh coils: a pre-installed 0.6Ω pod and a separate 0.8Ω pod. E-liquid is not included. Compare the ten colour and finish options below, then use the selector for current pricing and availability.

OXVA XLIM Pro 4 Key Features

1800mAh Built-In Battery

Recharge and retain the device while refilling or replacing compatible pods. Time between charges varies with wattage, resistance and individual usage.

Adjustable 5–30W Output

Set the wattage within the installed pod's supported operating range. Automatic power matching is also provided; not every pod is suitable for the device's full 30W output.

Anti-Burn Technology

With ABT enabled and a compatible XLIM ABT cartridge installed, liquid-level monitoring can trigger a refill alert and interrupt firing when e-liquid becomes too low.

UNITECH 3.0 Mesh Pods

The included XLIM ABT UNITECH 3.0 cartridges use integrated mesh coils designed to support consistent heating, flavour delivery and vapour production.

0.98-Inch HD Colour Screen

Read battery status, wattage and other device information on the colour display. Choose from four screen themes and three vaping animations.

Customisable RGB Lighting

Selectable RGB effects complement the colour display and let you adjust the device's illuminated appearance.

Adjustable Side Airflow

Use the side airflow slider to move between a tighter MTL draw and a more open RDL inhale, depending on the installed pod.

Auto-Draw and Button Activation

The XLIM Pro 4 supports both inhale activation and physical button activation. Follow the manual for its controls and operating settings.

5V/3A USB-C Charging

Recharge through the USB Type-C port with suitable equipment. The manufacturer-rated input is 5V/3A; actual charging performance depends on the power source and conditions.

Two 2ml Refillable Pods Included

The listed UK kit includes a pre-installed 0.6Ω XLIM ABT pod and a separate 0.8Ω XLIM ABT pod. Both hold 2ml and have built-in mesh coils.

OXVA XLIM Pro 4 Available Colours

Choose from ten listed colours and finishes at London Vape Store. Check the selector for current stock.

Black Carbon

Cocoa Black Leather

Flowing Dark Blue

Flowing Ice Blue

Flowing Midnight

Flowing Moonlight

Flowing Rose Pink

Glacier Grey Leather

Stardust Blue

Stardust Purple

How OXVA Anti-Burn Technology Works

E-Liquid Level Monitoring with Compatible ABT Pods

ABT is designed to detect low liquid levels in supported XLIM ABT cartridges. When enabled, it can display a refill reminder and interrupt output to help prevent the coil operating without sufficient e-liquid.

ABT operation requires:

A compatible OXVA XLIM ABT cartridge
The ABT function enabled on the device
Correct pod installation and operation

Important: Standard compatible XLIM cartridges may work without ABT liquid-level protection. ABT does not remove the need to refill, prime new pods or replace worn coils. Follow the manual and check liquid levels regularly.

OXVA XLIM Pro 4 Compatible Pods

The XLIM Pro 4 supports compatible OXVA XLIM refillable cartridges, including XLIM ABT pods and specified XLIM Top Fill cartridges. Check the exact cartridge model and recommended wattage before buying replacements.

Resistance	General Vaping Style	Availability
0.4Ω	More open RDL draw	Compatible option, sold separately
0.6Ω	MTL / RDL	XLIM ABT pod included
0.8Ω	MTL draw	XLIM ABT pod included
1.2Ω	Tighter MTL draw	Compatible option, sold separately

Resistance alone does not confirm compatibility. Match the pod format to your device and stay within the pod's recommended power range. Full 30W output may require a suitable lower-resistance cartridge. Only supported ABT cartridges provide ABT functionality.

OXVA XLIM Pro 4 Technical Specifications

Brand	OXVA
Product	XLIM Pro 4 Pod Vape Kit
Product Type	Refillable Pod Vape Kit
Battery Capacity	1800mAh Built-In
Power Output	5–30W Adjustable, subject to installed pod
Screen	0.98-Inch HD Colour Display
Anti-Burn Technology	ABT liquid-level detection with compatible ABT pods and function enabled
Included Pod Technology	XLIM ABT UNITECH 3.0
UK Pod Capacity	2ml
Included Pod Resistances	0.6Ω and 0.8Ω
Listed Compatible Resistances	0.4Ω / 0.6Ω / 0.8Ω / 1.2Ω; check exact cartridge model
Activation	Auto-Draw and Button
Airflow	Adjustable Side Airflow
Vaping Styles	MTL and RDL
Charging	USB Type-C, rated 5V/3A input
Screen Themes	4
Vaping Animations	3
Lighting	RGB Light Effects
Dimensions	124 × 27.4 × 17.6mm
Weight	Approximately 89g
Body Material	Zinc Alloy with IML / PU Finish
E-Liquid	Not Included
Listed Finishes	10
Retailer	London Vape Store

Suitable E-Liquids for the OXVA XLIM Pro 4

Choose e-liquid suitable for your specific pod and OXVA's recommendations. Listed options include:

50/50 VG/PG e-liquids
Compatible nicotine salt e-liquids
Compatible freebase nicotine e-liquids

Suitability depends on cartridge resistance and the manufacturer's guidance. E-liquid is sold separately; the included pods are empty.

How to Set Up the OXVA XLIM Pro 4 Vape Kit

Step 1 – Unpack the Kit: Remove the device and supplied pods, then inspect them for damage.

Step 2 – Fill the Pod: Open the filling port and add suitable e-liquid, avoiding the central airflow channel.

Step 3 – Seal the Filling Port: Secure the silicone stopper and check that the pod is properly closed.

Step 4 – Prime the Coil: Allow approximately 10 minutes for a new pod's wick to absorb e-liquid before first use, following the supplied guidance.

Step 5 – Insert the Pod: Fit the prepared cartridge into the device.

Step 6 – Power On: Press the button five times quickly, as described in the operating instructions.

Step 7 – Adjust Settings: Choose wattage suitable for the installed pod and adjust airflow. Use the manual for ABT, display and lighting settings.

Step 8 – Recharge When Needed: Use suitable USB-C equipment and follow the charging instructions. Do not leave the device charging unattended.

What's in the OXVA XLIM Pro 4 Box?

1 × OXVA XLIM Pro 4 Device
1 × XLIM ABT UNITECH 3.0 0.6Ω Pod – 2ml, pre-installed
1 × XLIM ABT UNITECH 3.0 0.8Ω Pod – 2ml
1 × USB Type-C Charging Cable
1 × User Manual
1 × Use Suggestion Card

Contents reflect the listed UK configuration. Check your supplied packaging. E-liquid is sold separately.

Frequently Asked Questions

What is the OXVA XLIM Pro 4?

A rechargeable refillable pod kit with an 1800mAh battery, adjustable 5–30W output, a colour display and Anti-Burn Technology for supported ABT pods.

What is the battery capacity?

The built-in rechargeable battery has a listed capacity of 1800mAh. Battery life depends on your settings and use.

What does Anti-Burn Technology do?

When enabled with a compatible ABT cartridge, liquid-level monitoring can show a refill alert and interrupt output when liquid becomes too low. It does not eliminate normal coil wear or replace correct priming.

Does ABT work with every XLIM pod?

No. Liquid-level detection requires a supported XLIM ABT pod and the function enabled. Standard compatible XLIM pods do not provide the same protection.

What wattage can I use?

The device supports 5–30W, but you must stay within the installed pod's recommended operating range.

Which pods are included?

The listed UK kit includes two 2ml XLIM ABT UNITECH 3.0 mesh pods: 0.6Ω pre-installed and a separate 0.8Ω cartridge.

Is the XLIM Pro 4 refillable?

Yes. Fill the included empty pods through their filling port using suitable e-liquid, then close the port securely.

Does it support MTL and RDL vaping?

Yes, with an appropriate compatible pod, power setting and airflow adjustment.

Can I use nicotine salt e-liquid?

Compatible nicotine salt and 50/50 e-liquids can be used. Follow OXVA's recommendations for the exact pod resistance and e-liquid.

How do I charge the device?

Use the USB Type-C port and suitable charging equipment. The listed rated input is 5V/3A; follow the manufacturer's instructions.

Does the kit contain nicotine?

No e-liquid or nicotine is supplied with the device and empty pods. Nicotine content depends on the e-liquid you purchase separately.

Which colours are listed?

Ten finishes are listed at London Vape Store, including Black Carbon, Cocoa Black Leather, the Flowing finishes, Glacier Grey Leather, Stardust Blue and Stardust Purple. Check the selector for current availability.

Where can I check the price and order?

Use the London Vape Store product selector above to view current pricing, choose an available finish and add the kit to your basket.

EXPLORE MORE VAPE PRODUCTS

4 Related Vape Products

Compare alternative refillable and prefilled systems at London Vape Store. These products use their own pod formats; none are XLIM Pro 4 replacement cartridges. Select a picture or button for product details.

ASPIRE

GOTEK PRO 2 KIT

Compare the Aspire Gotek Pro 2 rechargeable refillable pod kit.

View Product →

ASPIRE

GOTEK V2 PODS

Two-pack of refillable pods for compatible Aspire devices, not XLIM kits.

View Product →

VAPORESSO DOJO

BLAST 10K FRESH KIT

Compare a rechargeable prefilled system from the Dojo range.

View Product →

VOZOL

SLEEK MAX 10K KIT

Compare the Vozol Sleek Max 10K rechargeable prefilled pod kit.

View Product →

Comparing Refillable Pod Kits?

View the Aspire Gotek Pro 2 as another refillable option. It uses its own compatible pods, not OXVA XLIM cartridges.

Compare the Gotek Pro 2 →

LONDON VAPE STORE

Choose Your OXVA XLIM Pro 4

Compare ten finishes for this 1800mAh refillable pod kit. Adjustable 5–30W output, a colour screen and two included 2ml XLIM ABT pods let you tailor the setup within the cartridges' supported settings.

Use the selector above for current pricing and colour availability. E-liquid is sold separately.

Important Information: This rechargeable kit is supplied with empty refillable pods. E-liquid and nicotine are not included. Intended for adults aged 18 and over. Nicotine-containing e-liquids are highly addictive and are not intended for non-smokers. Keep the device, pods and e-liquids out of reach of children and pets. Do not use damaged or leaking components. Follow the manufacturer's filling, priming, charging, handling and disposal instructions. Anti-Burn Technology requires a supported XLIM ABT cartridge and the relevant function enabled; it does not eliminate normal coil wear. Check the supplied UK configuration before use.

Oxva Xlim Pro 4 Pod Vape Kit